jorc-logo-360x360.png
JORC accessories products top banner

ACCESSORY PRODUCTS

Top-quality condensate management equipment accessories

Great care is taken to ensure long lasting components are selected and applied in our products. JORC products are designed in a way that makes servicing simple, quick and error free. Servicing JORC products is a cost effective way to recondition the products for many more years of draining service. Accessories include strainer, adapters, service kits, spare coils etc.

bvs.png

STRAINERS | JORC Industrial LLC

The OPTIMUM timer drain has a 4.5 mm orifice and the EAD timer drain a 4.0 mm orifice.
connectors.png

CONNECTORS | JORC Industrial LLC

Power (DIN) connectors are available in FORM A & B (square and rectangle), with or without a moulded power cord.
brackets.png

Brackets - Wall mounting brackets | JORC Industrial LLC

Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.
709105web.jpg

REMOTE CONTROL KIT - Accessory for AIR-SAVERS | JORC Industrial LLC

A typical compressed air system has air loss through pipe work connections, leaking float type drains etc.
service-kits.jpg

SERVICE KITS | JORC Industrial LLC

Great care is taken to ensure long lasting components are selected and applied in our products.
airlockadapter.png

Adapters - ANTI-AIRLOCK ADAPTER | JORC Industrial LLC

The anti-airlock adapter is simple to install and helps prevent air locks from being created.
9045.png

MULTI-INLET ADAPTER | JORC Industrial LLC

The SEPREMIUM 5 – 60 models offer two inlet options.
side-inlet-2.jpg

SIDE INLET ADAPTER | JORC Industrial LLC

A specially designed adapter is available to offer a side inlet option for the SMART-GUARD-MINI zero air loss drain.
heaterweb.jpg

DRAIN HEATER | JORC Industrial LLC

In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
adapter.jpg

Accessory - T-adapter | JORC Industrial LLC

The T-adapter is simple to install and enables you to connect the DRAIN HEATER to various 1/2"" drains.
naamloos-1.jpg

Valves - SOLENOID VALVES | JORC Industrial LLC

A wide range of solenoid valves are offered in a 2/2 way and 3/2 way configuration.
coils.png

SOLENOID COILS | JORC Industrial LLC

JORC’s JC-type coils are produced with H-grade coil insulation, ensuring maximum heat resistance during operation.
ip65.png

Sealing sets - IP COIL SEALING SET | JORC Industrial LLC

A solenoid valve is a very versatile product.
plattomain.jpg

PLATTO | JORC Industrial LLC

When oil/water separators are being serviced, it is important that condensate does not contaminate your customer's factory floor or compressor room.