Magnetically operated zero air loss drain

The MAG-11 is the optimum choice in compact energy saving condensate drains, typically installed in (refrigerated) dryers and under piston compressors.

Unlike timer- or electronic drains, which require electricity to operate, the MAG-11 operates using a magnet level sensor providing energy saving zero air loss operation without the need for a power source.

Perfectly suited for coolers, refrigerated dryers, liquid separators, and piston compressors, the MAG-11 uses a magnetically operated 2/2-way direct-acting valve assembly, discharging the condensate from your compressed air system without losing any of your valuable compressed air.

The MAG-11 meets the demand of virtually any application, regardless of the condensate flow. It fits in any application, regardless of size, without any set up or adjustment.

The MAG-11 is also available with a test feature. The test button offers the solution to check your MAG-11 ensuring nothing is obstructing the orifice. It also allows you to depressurize the drain for those yearly maintenance moments.

NEW! MAG-11 optionally available with test button!

MAG-11 optionally available with test button.

Two inlet options.

magy sp inlets

Specially selected magnets operate the 2/2 way direct acting valve assembly

float 1
  • Extremely compact with top and side inlets.
  • Easy to install in tight locations.
  • No electricity required and no operating cost once installed.
  • Level sensed magnetic technology saves air, energy and money!
  • 2/2-Way direct acting valve, for a reliable discharge of virtually any condensate.
  • Rugged corrosion resistant aluminium housing finished with an EP coating.
  • Lightweight, yet strong and durable.
  • Built in air lock prevention.
  • Service kits available.
  • Operating pressure 0 to 230 psi.
  • Bottom (outlet) can be rotated 360° for installation simplicity.
  • Also available with a test button.

  • MAXIMUM FILTER CAPACITY

Unlimited

  • MAXIMUM DRAINAGE CAPACITY

38 gallons per hour at 230 psi (16 bar)
145 liters per hour at 230 psi (16 bar)

  • PRESSURE RANGE

0 - 230 PSI (0 - 16 bar)

  • VALVE TYPE

2/2 way, direct acting

  • VALVE SEALS

FPM

  • INLET CONNECTIONS

1/2″ NPT (2*)

  • OUTLET CONNECTION

1/8″ with hose pipe connector

  • INLET HEIGHT

3.9"

  • MEDIUM TEMPERATURE

34 - 122 °F

  • AMBIENT TEMPERATURE

34 - 122 °F

  • SERVICEABLE VALVE

Yes

  • ENVIRONMENTAL PROTECTION

NEMA6 (IP68)

  • HOUSING MATERIAL

Corrosion resistant aluminium, EP coating

  • TEST FEATURE

Optionally available

  • CALIFORNIA PROPOSITION 65

See manual

MAG-11, SEE HOW IT WORKS.


MAG-11 INTRODUCTION: