POD-TD
Pneumatically operated level sensed condensate drain
The POD-TD removes condensate from compressed air systems without using electricity and without the unnecessary loss of compressed air.
The discharge process is automatic and is based on a 3/2 way level controlled valve principle that operates a piston type direct acting valve. The advantage of this valve principle is that the POD-TD’s orifice can be 6 mm, offering an increased reliability factor.
The POD-TD is ideally suited in applications where power is not available, too expensive or not reliable. The POD-TD features a specially treated robust aluminium housing suitable for oil lubricated and oil-free applications.
In addition, the POD-TD can be applied in applications that demand a higher IP rating. The POD-TD offers an IP68/NEMA6 rating.
Share
TEST button feature for routine testing.
- Competitive ‘true green’ solution
- No operating costs
- No electricity required - install and go!
- Operating pressure up to 230 psi
- Reduced stocking costs - 1 model covers 3,500 CFM
- Suitable for any type of compressed air system
- No complicated sizing charts required
- Compact and unique design
- Successful draining of condensate due to large orifice (also heavily emulsified condensate)
- Incredibly easy and quick to install and to service
- No complicated control air line and pressure regulator required
- Integrated strainer
- Top and side inlets available
- Test feature
- Robust aluminum housing
- Direct acting valve construction for a reliable condensate discharge operation
| 3,500 CFM |
| 281 gallons condensate per hour at 230 psi |
| 44 - 230 psi |
| 34 - 122 °F |
| 34 - 122 °F |
| IP68 (NEMA6) |
| 1/2" NPT, 3 inlet options |
| 4.4" (top) and 3.8" & 0.5" (side) |
| 1/4" BSP, with brass hose barb adapter |
| Direct acting |
| 6 mm |
| FPM |
| Yes |
| Corrosion resistant aluminium, EP coating |
| Yes |
DOWNLOADS
SERVICE KITS
Great care is taken to ensure long lasting components are selected and applied in our products.
Learn More
MOUNTING BRACKETS
Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.
Learn More
DRAIN HEATER
In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
Learn More
STRAINERS
The OPTIMUM timer drain has a 4.5 mm orifice and the EAD timer drain a 4.0 mm orifice.
Learn More
Features
TEST button feature for routine testing.
- Competitive ‘true green’ solution
- No operating costs
- No electricity required - install and go!
- Operating pressure up to 230 psi
- Reduced stocking costs - 1 model covers 3,500 CFM
- Suitable for any type of compressed air system
- No complicated sizing charts required
- Compact and unique design
- Successful draining of condensate due to large orifice (also heavily emulsified condensate)
- Incredibly easy and quick to install and to service
- No complicated control air line and pressure regulator required
- Integrated strainer
- Top and side inlets available
- Test feature
- Robust aluminum housing
- Direct acting valve construction for a reliable condensate discharge operation
Specifications
| 3,500 CFM |
| 281 gallons condensate per hour at 230 psi |
| 44 - 230 psi |
| 34 - 122 °F |
| 34 - 122 °F |
| IP68 (NEMA6) |
| 1/2" NPT, 3 inlet options |
| 4.4" (top) and 3.8" & 0.5" (side) |
| 1/4" BSP, with brass hose barb adapter |
| Direct acting |
| 6 mm |
| FPM |
| Yes |
| Corrosion resistant aluminium, EP coating |
| Yes |
Certificates
Downloads
DOWNLOADS
Accessories
SERVICE KITS
Great care is taken to ensure long lasting components are selected and applied in our products.
Learn More
MOUNTING BRACKETS
Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.
Learn More
DRAIN HEATER
In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
Learn More
STRAINERS
The OPTIMUM timer drain has a 4.5 mm orifice and the EAD timer drain a 4.0 mm orifice.
Learn More