MAG-11

Magnetically operated zero air loss drain

The MAG-11 is the optimum choice in compact energy saving condensate drains, typically installed in (refrigerated) dryers and under piston compressors.

Unlike timer- or electronic drains, which require electricity to operate, the MAG-11 operates using a magnet level sensor providing energy saving zero air loss operation without the need for a power source.

Perfectly suited for coolers, refrigerated dryers, liquid separators, and piston compressors, the MAG-11 uses a magnetically operated 2/2-way direct-acting valve assembly, discharging the condensate from your compressed air system without losing any of your valuable compressed air.

The MAG-11 meets the demand of virtually any application, regardless of the condensate flow. It fits in any application, regardless of size, without any set up or adjustment.

The MAG-11 is also available with a test feature. The test button offers the solution to check your MAG-11 ensuring nothing is obstructing the orifice. It also allows you to depressurize the drain for those yearly maintenance moments

NEW! MAG-11 optionally available with test button!

Request a Quote

Features

MAG-11 optionally available with test button.

Two inlet options.

Specially selected magnets operate the 2/2 way direct acting valve assembly

Extremely compact with top and side inlets.
Easy to install in tight locations.
No electricity required and no operating cost once installed.
Level sensed magnetic technology saves air, energy and money!
2/2-Way direct acting valve, for a reliable discharge of virtually any condensate.
Rugged corrosion resistant aluminium housing finished with an EP coating.
Lightweight, yet strong and durable.
Built in air lock prevention.
Service kits available.
Operating pressure 0 to 230 psi.
Bottom (outlet) can be rotated 360° for installation simplicity.
Also available with a test button.

Specifications

MAXIMUM FILTER CAPACITY	Unlimited
MAXIMUM DRAINAGE CAPACITY	38 gallons per hour at 230 psi (16 bar) 145 liters per hour at 230 psi (16 bar)
PRESSURE RANGE	0 - 230 PSI (0 - 16 bar)
VALVE TYPE	2/2 way, direct acting
VALVE SEALS	FPM
INLET CONNECTIONS	1/2″ NPT (2*)
OUTLET CONNECTION	1/8″ with hose pipe connector
INLET HEIGHT	3.9"
MEDIUM TEMPERATURE	34 - 122 °F
AMBIENT TEMPERATURE	34 - 122 °F
SERVICEABLE VALVE	Yes
ENVIRONMENTAL PROTECTION	NEMA6 (IP68)
HOUSING MATERIAL	Corrosion resistant aluminium, EP coating
TEST FEATURE	Optionally available
CALIFORNIA PROPOSITION 65	See manual