MINI-MAG

Magnetically operated zero air loss drain

The MINI-MAG is the optimum choice in compact energy saving condensate drains, typically installed in compressed air filters.

Unlike timer or electronic drains, which require electricity to operate, the MINI-MAG operates using a magnet level sensor providing energy saving zero air loss operation without the need for a power source.

Perfectly suited for compressed air filters (due to its compact size), the MINI-MAG uses a magnetically operated 2/2-way direct acting valve assembly, discharging the condensate from your compressed air system without losing any of your valuable compressed air.

The MINI-MAG meets the demand of virtually any application, regardless of the condensate flow. It fits in any compressed air filter, regardless of size, without any set up or adjustment.

JORC recommends to replace all unreliable filter (float) drains with the MINI-MAG.

Request a Quote

Features

Compact design.

Direct acting valve assembly.

Filter drain.

Extremely compact and easy to install in tight locations.
No electricity required and no operating cost once installed.
Level sensed magnetic technology saves air, energy and money!
2/2-Way direct acting valve, for a reliable discharge of virtually any condensate.
Rugged corrosion resistant aluminium housing finished with an EP coating.
Lightweight, yet strong and durable.
Built in air lock prevention.
Service kits available.
Operating pressure 0 to 230 psi.
Bottom (outlet) can be rotated 360° for installation simplicity.

Specifications

MAXIMUM FILTER CAPACITY	Unlimited
MAXIMUM DRAINAGE CAPACITY	38 gallons per hour at 230 psi (16 bar) 145 liters per hour at 230 psi (16 bar)
PRESSURE RANGE	0 - 230 PSI (0 - 16 bar)
VALVE TYPE	2/2 way, direct acting
VALVE SEALS	FPM
INLET CONNECTIONS	1/2″ NPT
OUTLET CONNECTION	1/8″ with hose pipe connector
INLET HEIGHT	3.9"
MEDIUM TEMPERATURE	34 - 122 °F
AMBIENT TEMPERATURE	34 - 122 °F
SERVICEABLE VALVE	Yes
ENVIRONMENTAL PROTECTION	NEMA6 (IP68)
HOUSING MATERIAL	Corrosion resistant aluminium, EP coating
CALIFORNIA PROPOSITION 65	See manual