ACCESSORY PRODUCTS

The T-adapter is simple to install and enables you to connect the DRAIN HEATER to various 1/2"" drains.

When oil/water separators are being serviced, it is important that condensate does not contaminate your customer's factory floor or compressor room.

JORC’s JC-type coils are produced with H-grade coil insulation, ensuring maximum heat resistance during operation.

A solenoid valve is a very versatile product.

The anti-airlock adapter is simple to install and helps prevent air locks from being created.

The SEPREMIUM 5 – 60 models offer two inlet options.

The FLUIDRAIN and EZ-1 drain valves have an orifice of 4.5 mm (EZ-1 4.0 mm).

In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.

Great care is taken to ensure long lasting components are selected and applied in our products.

Mounting brackets allow easy installation of condensate drains and small oil/water separators to walls, on the floor or inside of refrigerated dryers.

Power (DIN) connectors are available in FORM A & B (square and rectangle), with or without a moulded power cord.

A wide range of solenoid valves are offered in a 2/2 way and 3/2 way configuration.

A typical compressed air system has air loss through pipe work connections, leaking float type drains etc.

A specially designed adapter is available to offer a side inlet option for the KAPTIV-MD zero air loss drain.