After the oily condensate has been efficiently removed from the compressed air system by a reliable JORC drain, it should not be discharged into the foul sewer without first having the oil content reduced to within legal disposal limits. It makes financial sense to separate the oil from the condensate prior to the waste being disposed of. JORC’s Air Compressor Oil Water Separators are a reliable, effective, efficient, and above all environmental solution.
EFFICIENT AIR COMPRESSOR OIL WATER SEPARATORS BY JORC
Elevate your compressed air system's eco-friendliness with JORC's Air Compressor Oil Water Separators. Designed to effectively separate oil from water, our separators provide a cost-effective solution to maintain both environmental standards and the longevity of your equipment.
SEPREMIUM 30i
The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems.
SEPREMIUM 10i
The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems.
Oil Water Separators - SEPREMIUM 750
The SEPREMIUM 750 oil/water separator uses three stages of treatment to separate the condensate from compressed air systems up to 750 CFM compressor capacity.
Oil Water Separators - SEPREMIUM 2500
The SEPREMIUM 2500 oil/water separator uses three stages of treatment to separate the condensate from compressed air systems up to 2500 CFM compressor capacity.
Condensate Distribution
Large compressor systems might require two or more oil/water separators to be installed to match the total compressor capacity of an installation.
SERVICE PACKS
The clever lubricant adsorbing elements of the PURO-CT and SEPREMIUM are designed to perform in the widest range of applications.
CONDENSATE TESTKIT
JORC offers an in-house laboratory test kit to analyse and determine the succes rate of our oil/water separators prior to sale and/or installation.
Oil Water Separators - PURO-CT 125
The PURO-CT 125 uses two stages of treatment to separate difficult condensate.
Oil Water Separators - PURO-CT 250
The PURO-CT 250 uses two stages of treatment to separate difficult condensate.
PURO-CT 600
The PURO-CT 600 uses two stages of treatment to separate difficult condensate.
PURO-CT-DISTRIBUTOR
The PURO-CT-DISTRIBUTOR is designed to distribute condensate into two or three oil/water separators.
Why Use an Oil Water Separator?
Throughout their lifecycle, oil-injected air compressors produce a significant amount of oily residue as a by-product. It is composed of water condensate contaminated by oil which is used to lubricate the compressor's internal components. To prevent damage to air compressors and related equipment, this oily water condensate is removed from the compressed air system by specifically designed drains.
But that’s not the end of the story. This oily condensate cannot be simply ejected into the sewer system as it will contaminate rivers, lakes, and oceans.
To meet clean water local and federal regulations, the oil content of the condensate needs to be reduced to within legal disposal limits. This is where the importance of the Oil Water Separator comes in.
An Oil Water Separator is used to remove the oil from condensate produced by oil-injected compressors before it is flushed into the sewer.
Oil / Water Separator For Air Compressors Help You Avoid Harming the Environment and Costly Fines
Regulations geared toward environmental protection are becoming more stringent globally. In most locales around the world, oil water separators have become mandatory for compressed air applications. Not using an oil water separator with air compressors not only damages compressed air system equipment and efficiency, but can also result in costly fines.
JORC’s PREMIUM Oil Water Separators are a reliable, cost-effective, efficient, and above all indispensable environmental solution.
Fit for All Compressed Air Applications
JORC family of oil water separators can tackle a wide range of compressed air applications. From small applications with a low condensate flow (up to 70 CFM) to large compressed air systems with a flow of up to 2500 CFM, there’s a JORC oil water separator that’s right for you.
They deliver efficiently effective oil condensate separation performance, regardless of the type of lubricant or drains you use. Our separators use high-performance filtration elements such as specially treated polypropylene and a carbon polisher for reliable condensate separation performance.
Our larger oil water separators are easy to maintain and install. They offer brass connections for easy connection and maintenance, and are compatible with virtually all drain systems.
SEPREMIUM SERIES
The SEPREMIUM series is our most popular range of oil water separators. SEPREMIUM oil water separators use oil-adsorbing elements that combine the latest adsorption technologies. SEPREMIUM models are oil water separators that offer flow rates from 70 to 2500 CFM.
PURO-CT SERIES
Widely used in the industry, JORC’s PURO-CT series water oil separators offer a proven, simpler design, delivering an economical choice for your condensate separation needs. These two-stage separators feature flow rates from 125 to 600 CFM.
Useful Features
- A visual element life indicator
- An overflow indicator to avoid messy spills
- Compatible with virtually all drain systems
- Brass valves at each tower for easy routine servicing and cleaning
- No need for a settling tank
Parts and Accessories
At Jorc, we also carry proven and indispensable parts and accessories, including
- Distributors to connect multiple oil separators and distribute the condensate equally.
- Service Packs that contain element fibers that have been specially selected and treated to maximize supreme adsorbing performance.
- Carbon Elements, packaged in JORC’s high-quality nettings and fillings.
- Condensate Test Kits; an in-house laboratory test kit to analyze the output and determine the success rate of your oil water separators.