In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
The DRAIN HEATER guarantees a continuous condensate flow in all systems where you have trouble keeping the condensate flowing due to extreme cold weathers.
The DRAIN HEATER can be installed on the SMART GUARD, MAG-11 and POD-TD models.
Please note; if the pipework leading up to and leading from the drain is insulated, then the drain will typically not require any anti-freezing device. JORC drains are produced from materials that will operate in extreem cold weather conditions. Often the desire to apply anti-freezing devices on drains is derived from situations wherein competitive product experiences have formed a mind-set.
The DRAIN HEATER applied on the MAG-11.
The DRAIN HEATER applied on the SMART GUARD.
The DRAIN HEATER applied on the POD-TD.
|Voltage supply||230VAC or 115VAC|
|Power consumption 230V||0,5A|
|Power consumption 115V||1,1A|
|Max. pressure||435 PSI|
|Thread size||1/2" NPT|
|Cable length||6.5 ft.|
|Housing material||Brass and Stainless steel|
|Environmental protection||NEMA4 (IP65)|
|Thermostat body||<+40 °F ON / >+60 °F OFF|
|Thermostat head||<+105 °F ON / >+150 °F OFF|
|Applicable temperature||-13 °F / +40 °F|
|Appliance class||1 (earth)|