High quality PCB components, offering you consistent quality.
The FLUIDRAIN timer controlled condensate drain is suitable for a wide range of compressed air applications including compressors, receivers, filters and refrigerated air dryers.
With an easily adjustable electronic timer, a direct acting solenoid valve, a large orifice and options for a brass or stainless steel body, this drain provides reliable compact condensate removal.
The FLUIDRAIN is easy to install, simple to adjust and rated for pressures up to 230 PSI. It includes a test switch, LED on/off indication and a serviceable valve. Most importantly, the large 4.5 mm orifice means it is perfect for difficult applications with high condensate flow rates and solid particulate contaminants.
The 115VAC version of this drain is supplied with a 6 ft. power cord with plug and the 230VAC version is supplied with a 7 ft. power cord.
Serviceable valve, offering you annual maintenance revenues.
Private labelling possible, offering you product personalisation.
- Does not air-lock during operation.
- Suitable for any type of compressed air systems and up to any size.
- Also available in Stainless steel and High pressure.
- TEST (micro-switch) feature.
- Accurate time cycles.
- Large (4.5 mm) valve orifice.
- Voltage range 12 - 380VAC/DC.
- Environmental low Watt version available.
| Any size |
| 0 - 16 bar (higher pressure available, see FLUIDRAIN-HP-S) |
| 12 - 380 VAC/DC 50/60Hz. (please indicate) |
| 1 - 55 °C |
| 1 - 55 °C |
| 0.5 - 10 seconds / 0.5 - 45 minutes |
| SMD technology, ensuring consistency in production |
| Bright LED illumination |
| Yes |
| 2/2 way, direct acting |
| 4.5 mm |
| FPM |
| 1/8″, 1/4″, 3/8″, 1/2″ (BSP or NPT) |
| 1 cm |
| Yes |
| Brass (Stainless steel available) |
| DIN 43650-A |
| IP65 (NEMA4) |
FLUIDRAIN - SEE HOW IT WORKS
FLUIDRAIN INTRODUCTION: