DRAIN HEATER

Anti-freezing device

In very cold temperatures, condensate may run the risk of freezing when it does not continuously flow through the system.
The DRAIN HEATER guarantees a continuous condensate flow in all systems where you have trouble keeping the condensate flowing due to extreme cold weathers.

The DRAIN HEATER can be installed on the KAPTIV-CS, MAGY and NUFORS-CR models.

Please note; if the pipework leading up to and leading from the drain is insulated, then the drain will typically not require any anti-freezing device. JORC drains are produced from materials that will operate in extreme cold weather conditions. Often the desire to apply anti-freezing devices on drains is derived from situations wherein competitive product experiences have formed a mind-set.

Features

The DRAIN HEATER applied on the MAGY.

The DRAIN HEATER applied on the KAPTIV-CS.

The DRAIN HEATER applied on the NUFORS-CR.

The DRAIN HEATER prevents freezing up of the level sensed drains in extreme cold conditions.

Specifications

VOLTAGE SUPPLY	230VAC or 115VAC
POWER CONSUMPTION 230V	0,5A
POWER CONSUMPTION 115V	1,1A
MAX. PRESSURE	30 Bar
THREAD SIZE	1/2" BSP or NPT
HEX. SIZE	32mm
CABLE LENGTH	2 meters
HOUSING MATERIAL	Brass and Stainless steel
ENVIRONMENTAL PROTECTION	IP65 (NEMA4)
THERMOSTAT BODY	<+5 °C ON / >+15 °C OFF
THERMOSTAT HEAD	<+40 °C ON / >+65 °C OFF
APPLICABLE TEMPERATURE	-25 °C / +5 °C
APPLIANCE CLASS	1 (earth)