The OPTIMUM-HP timer controlled condensate drain is suitable for virtually any compressed air application up to 7250 PSI. This drain includes an easily adjustable electronic timer, a direct acting solenoid valve and choice of brass or 304 stainless steel body.
The OPTIMUM-HP is easy to install, simple to adjust and comes standard with a test switch, LED on/off indication and a fully serviceable valve. Choose from a machined brass body from 600 to 3625 PSI, or a machined stainless steel body from 600 to 7250 PSI. This drain is perfectly suited for high pressure applications and high condensate flow rates.
The 115VAC version of this drain is supplied with a 6 ft. power cord with plug and the 230VAC version is supplied with a 7 ft. power cord.
Stainless steel valve options, offering you solutions in niche markets.
Private labelling possible, offering you personal branding possibilities.
Serviceable valve construction, offering you routine maintenance revenues.
|Maximum compressor capacity||Any size|
|Pressure range||0 - 7250 PSI (depending on OPTIMUM model)|
|Supply voltage options||12 - 380 VAC/DC 50/60Hz. (please indicate)|
|Medium temperature||34 - 131 °F|
|Ambient temperature||34 - 131 °F|
|Timer cycle range (On / Off)||0.5 - 10 seconds / 0.5 - 45 minutes|
|Timer PCB||SMD technology, ensuring consistency in production|
|Timer cycle indication||Bright LED illumination|
|Valve type||2/2 way, direct acting|
|Valve orifice||Depending on pressure|
|Valve seals||FPM or other, depending on pressure and application|
|Inlet/outlet connections||1/4″ NPT|
|Inlet connection height||0.4"|
|Valve housing material||Brass and Stainless steel valve constructions, depending on pressure|
|Power connection||DIN 43650-A|
|Environmental protection||NEMA4 (IP65)|
|California Proposition 65||See manual|