

Click the catalog above to see Jorc Industrial's Online Catalog
|
|
|
|
|
 |
| THE JORC-TEC 44 MOTORIZED BALL VALVE FOR DELIQUESCENT DRYERS AND HIGHLY CONTAMINATED COMPRESSED AIR SYSTEMS. |
|
The JORC-TEC44 MBV will successfully remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. The JORC-TEC 44 is designed to remove high viscosity effluents at pressure ratings up to 600 psi. The MBV features microprocessor technology, a 10 channel programmable cycle with LCD, valve open LED, push to test button, ant blockage system, and a battery back-up for protection against power failure.
BATTERIES: The JORC-TEC 44 is equipped with a power failure protection safeguard, the power failure protection safeguard consists of 4 AA size, 1.5V (penlight) batteries. |
| | |
|
FEATURES: |
- Microprocessor controlled
- Fully automatic - no maintenance
- External push button controls (disassembly not necessary)
- Simple to install
- 10 cycle options (easy program) for control of open and closed cycles
- Anti-blockage feature protecting the gearing mechanism
- LED indicating valve ON
- LCD displaying the program cycle number
- Small compact design
- 600 psi and FPM seals
- Voltage 230VAC and 115VAC 50/60Hz
- 1/2" connection size in NPT.
- Orifice 12 mm (61/128")
- Ball rotation 180 degrees in 7.5 seconds
- Stainless steel ball, valve is nickel plated brass
| |
|

|
|
Failure to carry out regular routine draining, either manually or by float draining can have catastrophic results. Compressed air systems can become grossly contaminated and production schedules seriously disrupted - just because a simple duty has been neglected. |
| | |
| TEC 44: |
SPECIFICATIONS: |
| Interval (OFF) time |
4 minutes to 24 hours, programmable |
| Discharge (ON) time |
7.5 seconds to 15 minutes, programmable |
| Manual TEST switch |
Yes |
| Supply voltage |
Fully adjustable from 0.5-10 sec per outlet |
| Operating temperature |
36 F to 140 F |
| Environmental protection |
Weatherproof |
| Valve |
Nickel plated brass with stainless steel ball |
| Connection |
1/2" NPT |
| Maximum pressure |
600 psi |
| Indicators |
LED to indicate valve open, LCD indicating prog.# |
| Back-up |
Battery back-up pack protecting against power failure |
| Ant blockage system |
Yes |
 |
| Interval time cycles (OFF, valve closed): |
| 0 = 4 minutes |
| 1 = 8 minutes |
| 2 = 15 minutes |
| 3 = 30 minutes |
| 4 = 1 hour |
| 5 = 2 hours |
| 6 = 4 hours |
| 7 = 8 hours |
| 8 = 16 hours |
| 9 = 24 hours |
| - = external switching only (SPDT / voltage free) | |
 |
| Discharge time cycles (ON, valve open): |
| A = 7 seconds rotation (non stop) |
| B = 10 seconds rotation (valve stays open 3 sec) |
| C = 15 seconds rotation (valve stays open 8 sec) |
| D = 20 seconds rotation (valve stays open 13 sec) |
| E = 25 seconds rotation (valve stays open 18 sec) |
| F = 30 seconds rotation (valve stays open 23 sec) |
| H = 45 seconds rotation (valve stays open 38 sec) |
| L = 1 minute rotation (valve stays open 53 sec) |
| P = 5 minutes rotation (valve stays open 4 min/53 sec) |
| O = 15 minutes rotation (valve stays open 14 min/53 sec) | | | |